Main parameters:

capacity 8 tons.
Max. width: 1250mm
Max. outer diameter of coil: 1800mm
Inner diameter of coil: 500-600mm
Expansion by hydraulic device.
rotated speed; 0-20 RPM; speed adjustable
power of oil motor: 2.20 KW

Forming steps: stations number depend on selected profile with entry guide stand
Each station consist of 2 sets of roller around 2 shafts one up and one down.
Main machine base is assembled by high class and precise welding treatment.
Transmit system: AC motor drive the reduction gearbox change over to the forming rollers simultaneously.
Main machine motor: 11.00 KW; 380V, 50HZ
Roll forming speed: 3-15 M/Min
Roller's specification: 45# steel, plating chrome; hardness up to HRC50-55.
Shaft: 45# steel with heat treatment
The bearing with the shaft are capable of being adjusted according to the change of the material thickness.

Material of the cut-off blade: Cr12; hardness;    HRC57-60;
Clean cut without burring; wear-resistance, good steel structure.
Length tolerance: + 2mm/10m
Hydraulic oil pump power: 4.0 KW
Cut-off blade: 1 set
Hydraulic oil station supplying power to system 1 set
With oil fan cooler.

Simple structure   4 sets.
Welding structure.

By PLC + touchable interface +Inverter
Brand: MISTUBISH (Japan)
Rotary encoder to measure the length.